|
序号 |
标准号 |
标准名称 |
|
基础标准（28项） |
||
|
1 |
ISO 836:2001 |
Terminology for refractories耐火材料术语 |
|
2 |
ISO 1146:1988 |
Pyrometric reference cones for laboratory use—Specification 实验室用标准测温锥—技术条件 |
|
3 |
ISO 1927-1:2012 |
Monolithic(Unshaped) refractory products— Part 1: Introduction and classification 不定形耐火材料—第1部分：介绍及分类 |
|
4 |
ISO 1927-2:2012 |
Monolithic(Unshaped) refractory products— Part 2: Sampling for testing 不定形耐火材料—第2部分：抽样验收 |
|
5 |
ISO 1927-3:2012 |
Monolithic(Unshaped) refractory products— Part 3: Characterization as received 不定形耐火材料—第3部分：接收试样的特征 |
|
6 |
ISO 1927-4:2012 |
Monolithic(Unshaped) refractory products— Part 4: Determination of consistency of castables 不定形耐火材料—第4部分：浇注料稠度的测定 |
|
7 |
ISO 1927-5:2012 |
Monolithic(Unshaped) refractory products— Part 5: Preparation and treatment of test pieces 不定形耐火材料—第5部分：试样制备和预处理 |
|
8 |
ISO 1927-6:2012 |
Monolithic(Unshaped) refractory products— Part 6: Measurement of physical properties 不定形耐火材料—第6部分：物理性能的测试 |
|
9 |
ISO 1927-7:2012 |
Monolithic(Unshaped) refractory products— Part 7: Tests on pre-formed shapes 不定形耐火材料—第7部分：预制件的测试 |
|
10 |
ISO 1927-8:2012 |
Monolithic(Unshaped) refractory products— Part 8: Determination of complementary properties 不定形耐火材料—第8部分：其他性能的测试 |
|
11 |
ISO 2245:2006 |
Shaped insulating refractory products-classification 定形隔热耐火制品—分类 |
|
12 |
ISO 5019—1:1984 |
Refractory bricks—Dimensions—Part 1: Rectangular bricks 耐火砖—尺寸 第1部分：直形砖 |
|
13 |
ISO 5019—2:1984 |
Refractory bricks—Dimensions—Part 2: Arch bricks 耐火砖—尺寸 第2部分：楔形砖 |
|
14 |
ISO 5019—3:1984 |
Refractory bricks—Dimensions—Part 3: Rectangular checker bricks for regenerative furnace 耐火砖—尺寸 第3部分：蓄热室用直形格子砖 |
|
15 |
ISO 5019—4:1988 |
Refractory bricks—Dimensions—Part 4: Dome bricks for electric arc furnace roofs 耐火砖—尺寸 第4部分：电弧炉炉顶用球顶砖 |
|
16 |
ISO 5019—5:1984 |
Refractory bricks—Dimensions—Part 5: Skewbacks 耐火砖—尺寸 第5部分：拱脚砖 |
|
17 |
ISO 5019—6:2005 |
Refractory bricks—Dimensions—Part 6: Basic bricks for oxygen steel-making converters 耐火砖—尺寸 第6部分：氧化炼钢转炉用碱性砖 |
|
18 |
ISO 5022:1979 |
Shaped refractory products—Sampling and acceptance testing 定形耐火制品—抽样及验收检验 |
|
19 |
ISO 5417:1986 |
Refractory bricks for use in rotary kilns—Dimensions 回转窑用砖—尺寸 |
|
20 |
ISO 8656—1:1988 |
Refractory products—Sampling of raw materials and unshaped products—Part 1: Sampling scheme 耐火制品—耐火原料和不定形耐火材料抽样—第1部分：抽样方案 |
|
21 |
ISO 9205:1988 |
Refractory bricks for use in rotary kilns- hot- face identification marking 回转窑用耐火砖—热面标记 |
|
22 |
ISO 10080:1990 |
Refractory products—Classification of dense ,shaped acid-resisting products 耐火制品—致密定形耐酸制品的分类 |
|
23 |
ISO 10081—1:2003 |
Classification of dense, shaped refractory products—Part 1:Alumina-silica 致密定形耐火制品的分类—第1部分：铝硅质耐火制品 |
|
24 |
ISO 10081—2:2003 |
Classification of dense ,shaped refractory products—Part 2: Basic products containing less than 7% residual carbon 致密定形耐火制品的分类—第2部分：残炭量小于7%的碱性耐火制品 |
|
25 |
ISO 10081—3:2003 |
Classification of dense ,shaped refractory products—Part 3: Basic products containing from 7% to 50% residual carbon 致密定形耐火制品的分类—第3部分：残炭量7%～50%的碱性耐火制品 |
|
26 |
ISO 10081—4:2014 |
Classification of dense ,shaped refractory products—Part 4: Special products致密定形耐火制品的分类—第4部分：特殊制品 |
|
27 |
ISO 12678—1:1996 |
Refractory products—Measurement of dimension and external defects of refractory bricks—part 1: Dimension and conformity to drawings 耐火制品—耐火砖尺寸和外观缺陷的检验—第1部分：实际尺寸与设计图纸尺寸的一致性 |
|
28 |
ISO 12678—2:1996 |
Refractory products—Measurement of dimension and external defects of refractory bricks—part 2: Corner and edge defects and other surface imperfections 耐火制品—耐火砖尺寸和外观缺陷的检验—第2部分：边角缺陷及其他表面缺陷 |
|
物理试验方法标准（39项） |
||
|
29 |
ISO 528:1983 |
Refractory products—Determination of refractoriness 耐火制品—耐火度的测定 |
|
30 |
ISO 1893:2007 |
Refractory products—Determination of refractoriness under load—differential method with rising temperature 耐火制品—荷重软化温度的测定(示差—升温法) |
|
31 |
ISO 2477:2005 |
Shaped insulating refractory products—determination of permanent change in dimensions on heating 定形隔热耐火制品—加热永久线变化的测定 |
|
32 |
ISO 2478:2025 |
Dense shaped refractory products—determination of permanent change in dimensions on heating 致密定形耐火制品—加热永久线变化的测定 |
|
33 |
ISO 3187:1989 |
Refractory products—Determination of creep in compression 耐火制品—压蠕变的测定 |
|
34 |
ISO 5013:1985 |
Refractory products—Determination of modulus of rupture at elevated temperature 耐火制品—高温抗折强度的测定 |
|
35 |
ISO 5014:2025 |
Dense and insulating shaped refractory products—Determination of modulus of rupture at ambient temperature 致密和隔热定形耐火制品—常温抗折强度的测定 |
|
36 |
ISO 5016:1997 |
Shaped insulating refractory products—Determination of bulk density and true porosity 定形隔热耐火制品—体积密度和真气孔率的测定 |
|
37 |
ISO 5017:2025 |
Dense shaped refractory products—Determination of bulk density ,apparent porosity and true porosity 致密定形耐火制品—体积密度、显气孔率和真气孔率的测定 |
|
38 |
ISO 5018:1983 |
Refractory materials—determination of true density 耐火材料—真密度的测定 |
|
39 |
ISO 8840:2021 |
Refractory materials—determination of bulk density of granular materials 耐火材料—颗粒材料体积密度的测定 |
|
40 |
ISO 8841:1991 |
Dense shaped refractory products—Determination of permeability to gases 致密定形耐火制品—透气度的测定 |
|
41 |
ISO 8890:1988 |
Dense shaped refractory products—Determination of resistance to sulfuric acid 致密定形耐火制品—抗硫酸侵蚀性的测定 |
|
42 |
ISO 8894—1：2010 |
Refractory materials—Determination of thermal conductivity—Part 1：Hot—wire methods（cross—array and resistance thermometer） 耐火材料—导热系数的测定—第1部分：十字热线法和电阻温度计法 |
|
43 |
ISO 8894—2:2007 |
Refractory materials—Determination of thermal conductivity—Part 2：Hot—wire method（parallel） 耐火材料—导热系数的测定—第2部分：平行线法 |
|
44 |
ISO 8895:2004 |
Shaped insulating refractory products—Determination of cold crushing strength 定形隔热耐火制品—常温耐压强度的测定 |
|
45 |
ISO 10059—1:2025 |
Dense shaped refractory products—Determination of cold compressive strength Part 1: Referee test without packing 致密定形耐火制品—常温耐压强度的测定—第1部分：无衬垫仲裁法 |
|
46 |
ISO 10059—2:2003 |
Dense shaped refractory products—Determination of cold compressive strength Part 2: Test with packing 致密定形耐火制品—常温耐压强度的测定—第2部分：衬垫法 |
|
47 |
ISO 10060:1993 |
Dense shaped refractory products—test methods for products containing carbon 致密定形耐火制品—含碳制品试验方法 |
|
48 |
ISO 10635:1999 |
Refractory products—methods of test for ceramic fiber products 耐火制品—陶瓷纤维制品试验方法 |
|
49 |
ISO 12676:2000 |
Refractory products—Determination of resistance to carbon monoxide 耐火制品—抗一氧化碳性能的确定 |
|
50 |
ISO 12680—1:2005 |
Methods of test for refractory products—Part 1：Determination of dynamic Young,s modulus by impulse excitation of vibration 耐火材料试验方法—第1部分：脉冲激发振动法测定杨氏模量 |
|
51 |
ISO 13765—1:2004 |
Refractory mortars—Part 1: Determination of consistency using the penetrating cone method 耐火泥浆—第1部分：针入度法测定稠度 |
|
52 |
ISO 13765—2:2004 |
Refractory mortars—Part 2: Determination of consistency using the reciprocating flow table method 耐火泥浆—第2部分：流动法测定稠度 |
|
53 |
ISO 13765—3:2004 |
Refractory mortars—Part 3: Determination of joint stability 耐火泥浆—第3部分：粘结稳定性（粘结时间）的测定 |
|
54 |
ISO 13765—4:2004 |
Refractory mortars—Part 4: Determination of flexural bonding strength 耐火泥浆—第4部分：抗折粘结强度的测定 |
|
55 |
ISO 13765—5:2004 |
Refractory mortars—Part 5: Determination of grain size distribution(sieve analysis) 耐火泥浆—第5部分：粒度分布（筛分析）的测定 |
|
56 |
ISO 13765—6:2004 |
Refractory mortars—Part 6: Determination of moisture content of ready—mixed mortars 耐火泥浆—第6部分：湿态成品泥浆含水量的测定 |
|
57 |
ISO 13765—7:2021 |
Refractory mortars — Part 7: Determination of permanent change in dimensions on heating 耐火泥浆—第7部分：加热永久线变化试验方法 |
|
58 |
ISO 16282:2007 |
Dense shaped refractory products—Determination of resistance to abrasion at ambient temperature 致密定形耐火制品—常温耐磨试验方法 |
|
59 |
ISO 16334:2013 |
Monolithic refractory products -- Determination of resistance to explosive spalling 不定形耐火制品—抗爆裂性试验方法 |
|
60 |
ISO 16349:2015 |
Refractory materials -- Determination of abrasion resistance at elevated temperature 耐火材料高温耐磨性试验方法 |
|
61 |
ISO 16835:2014 |
Refractory products -- Determination of thermal expansion 耐火制品热膨胀性试验方法 |
|
62 |
ISO 18886:2016 |
Refractory test-piece preparation — Gunning refractory panels by wet gunning techniques 耐火材料试样的制备—采用气动—湿法喷补方法制备耐火喷射料大样 |
|
63 |
ISO 20182:2024 |
Refractory test—piece preparation—Gunning refractory panels by the pneumatic-nozzle mixing type guns 耐火材料试样的制备—采用气动—喷嘴混合型喷射方法制备耐火喷射料大样 |
|
64 |
ISO 21736:2020 |
Refractories — Test methods for thermal shock resistance 耐火材料抗热震性试验方法 |
|
65 |
ISO 22605:2020 |
Refractories — Determination of dynamic Young’s modulus (MOE) at elevated temperatures by impulse excitation of vibration 耐火材料—高温杨氏模量试验方法（脉冲激振法） |
|
66 |
ISO 22685:2021 |
Refractory products — Determination of compressive strength at elevated temperature 耐火材料—高温耐压强度试验方法 |
|
67 |
ISO 16206：2025 |
Phase quantitative analysis of residual quartz in silica bricks--Xray diffraction method 硅砖中残余石英定量相分析 X射线衍射法 |
|
化学分析方法标准（26项） |
||
|
68 |
ISO 10058—1:2008 |
Chemical analysis of magnesite and dolomite refractory products (alternative to the X-ray fluorescence method) Part 1: Apparatus, reagents, dissolution and determination of gravimetric silica 菱镁矿和白云石耐火制品化学分析方法（可与X射线荧光法并行使用的另一种方法）—第1部分：仪器、试剂、溶样及重量法测定二氧化硅 |
|
69 |
ISO 10058—2:2008 |
Chemical analysis of magnesite and dolomite refractory products (alternative to the X-ray fluorescence method) Part 2: Wet chemical analysis 菱镁矿和白云石耐火制品化学分析方法（可与X射线荧光法并行使用的另一种方法）—第2部分：湿法化学分析 |
|
70 |
ISO 10058—3:2008 |
Chemical analysis of magnesite and dolomite refractory products (alternative to the X-ray fluorescence method) Part 3: flame atomic absorption spectrophotometry and inductively coupled plasma atomic emission spectrometry 菱镁矿和白云石耐火制品化学分析方法（可与X射线荧光法并行使用的另一种方法）—第3部分：火焰原子吸收分光光度法（FAAS）和感应耦合等离子原子发射光谱法(ICP-AES) |
|
71 |
ISO 12677:2011 |
Chemical analysis of refractory products by XRF-Fused cast bead method 耐火制品X射线荧光化学分析（玻璃样片法） |
|
72 |
ISO 14719:2011 |
Chemical analysis of refractory material glass and glazes — Determination of Fe2+and Fe3+by the spectral photometric method with 1,10-phenanthroline 耐材、玻璃和釉料化学分析方法—二氮杂菲分光光度法测定二价和三价铁离子 |
|
73 |
ISO 14720-1:2013 |
Testing of ceramic raw and basic materials — Determination of sulfur in powders and granules of non-oxidic ceramic raw and basic materials —Part 1:Infrared measurement methods 陶瓷原料与碱性材料—粉末与颗粒状非氧化性陶瓷原料与碱性材料硫含量的测定—第1部分：感应炉熔融后红外测试法 |
|
74 |
ISO 14720-2:2013 |
Testing of ceramic raw and basic materials — Determination of sulfur in powders and granules of non-oxidic ceramic raw and basic materials —Part 2:Inductively coupled plasma optical emission spectrometry (ICP/OES) or ion chromatography after burning in an oxygen flow 陶瓷原料与碱性材料—粉末与颗粒状非氧化性陶瓷原料与碱性材料硫含量的测定—第2部分：氧气中燃烧后，ICP OES或IC 测试法 |
|
75 |
ISO 16169-2018 |
Preparation of silicon carbide and similar materials for analysis by ISO 12677 X-ray fluorescence (XRF) — Fused cast-bead method 利用ISO 12677 X射线荧光化学分析（熔铸玻璃片法）制备碳化硅及相似物质 |
|
76 |
ISO 20565—1:2008 |
Chemical analysis of chrome-bearing refractory products and chrome-bearing raw materials(alternative to the X-ray fluorescence method) Part 1: Apparatus, reagents, dissolution and determination of gravimetric silica 含铬耐火制品和含铬原料化学分析方法（可与X射线荧光法并行使用的另一种方法）—第1部分：仪器、试剂、溶样及重量法测定二氧化硅 |
|
77 |
ISO 20565—2:2008 |
Chemical analysis of chrome-bearing refractory products and chrome-bearing raw materials(alternative to the X-ray fluorescence method) Part 2: Wet chemical analysis 含铬耐火制品和含铬原料化学分析方法（可与X射线荧光法并行使用的另一种方法）—第2部分：湿法化学分析 |
|
78 |
ISO 20565—3:2008 |
Chemical analysis of chrome-bearing refractory products and chrome-bearing raw materials(alternative to the X-ray fluorescence method) Part 3: flame atomic absorption spectrophotometry and inductively coupled plasma atomic emission spectrometry 含铬耐火制品和含铬原料化学分析方法（可与X射线荧光法并行使用的另一种方法）—第3部分：火焰原子吸收分光光度法（FAAS）和感应耦合等离子原子发射光谱法(ICP-AES) |
|
79 |
ISO 21068—1:2024 |
Chemical analysis of silicon—carbide —containing raw materials and refractory products—Part 1: General information and sample preparation 含碳化硅原料及耐火制品的化学分析方法—第1部分：总则及制样 |
|
80 |
ISO 21068—2:2024 |
Chemical analysis of silicon—carbide —containing raw materials and refractory products—Part 2: Determination of loss on ignition, total carbon, free carbon and silicon carbide ,total and free silica and total and free silicon 含碳化硅原料及耐火制品的化学分析方法—第2部分：酌减、总碳、游离碳和碳化硅、总游离二氧化硅及游离二氧化硅、总游离硅及游离硅的测定 |
|
81 |
ISO 21068—3:2024 |
Chemical analysis of silicon—carbide —containing raw materials and refractory products—Part 3: Determination of nitrogen, oxygen, metallic and oxidic constituents 含碳化硅原料及耐火制品的化学分析方法—第3部分：氮、氧、金属成分及氧化物的测定 |
|
82 |
ISO 21068—4:2024 |
Chemical analysis of raw materials and refractory products containing silicon-carbide, silicon-nitride, silicon-oxynitride and sialon — Part 4: XRD methods 含碳化硅、氮化硅、氮氧化硅、赛隆原料及耐火制品的化学分析方法—第4部分：XRD法 |
|
83 |
ISO 21078—1:2008 |
Determination of boron oxide in refractory products—Part 1: Determination of total boron oxide in oxidic materials for ceramics, glass and glazes 耐火制品中B2O3的测定—第1部分：陶瓷、玻璃和釉料用氧化物材料中B2O3总量的测定 |
|
84 |
ISO 21078—2:2006 |
Determination of boron oxide in refractory products—Part 2: Acid extraction method of determination of boron oxide in binder 耐火制品中B2O3的测定—第2部分：酸萃取法测定结合剂中的B2O3 |
|
85 |
ISO 21079—1:2008 |
Chemical analysis of refractories containing alumina, zirconia and silica—Refractories containing from 5% to 45% of ZrO2 (alternative to the X-ray fluorescence method) Part 1: Apparatus, reagents, dissolution 含氧化铝、氧化锆、氧化硅耐火材料化学分析方法—含氧化锆5%～45%的耐火材料（可与X射线荧光法并行使用的另一种方法）—第1部分：仪器、试剂、溶样 |
|
86 |
ISO 21079—2:2008 |
Chemical analysis of refractories containing alumina, zirconia and silica—Refractories containing from 5% to 45% of ZrO2 (alternative to the X-ray fluorescence method) Part 2: Wet chemical analysis 含氧化铝、氧化锆、氧化硅耐火材料化学分析方法—含氧化锆5%～45%的耐火材料（可与X射线荧光法并行使用的另一种方法）—第2部分：湿法化学分析 |
|
87 |
ISO 21079—3:2008 |
Chemical analysis of chrome-bearing refractory products and chrome-bearing raw materials(alternative to the X-ray fluorescence method) Part 3: flame atomic absorption spectrophotometry and inductively coupled plasma atomic emission spectrometry 含氧化铝、氧化锆、氧化硅耐火材料化学分析方法—含氧化锆5%～45%的耐火材料（可与X射线荧光法并行使用的另一种方法）—第3部分：火焰原子吸收分光光度法（FAAS）和感应耦合等离子原子发射光谱法(ICP-AES) |
|
88 |
ISO 21587—1:2007 |
Chemical analysis of aluminosilicate refractory products (alternative to the X-ray fluorescence method) Part 1: Apparatus, reagents, dissolution and determination of gravimetric silica 铝硅酸盐耐火制品化学分析方法（可与X射线荧光法并行使用的另一种方法）—第1部分：仪器、试剂、溶样及重量法测定二氧化硅 |
|
89 |
ISO 21587—2:2007 |
Chemical analysis of aluminosilicate refractory products (alternative to the X-ray fluorescence method) Part 2: Wet chemical analysis 铝硅酸盐耐火制品化学分析方法（可与X射线荧光法并行使用的另一种方法）—第2部分：湿法化学分析 |
|
90 |
ISO 21587—3:2007 |
Chemical analysis of aluminosilicate refractory products (alternative to the X-ray fluorescence method) Part 3: flame atomic absorption spectrophotometry and inductively coupled plasma atomic emission spectrometry 铝硅酸盐耐火制品化学分析方法（可与X射线荧光法并行使用的另一种方法）—第3部分：火焰原子吸收分光光度法（FAAS）和感应耦合等离子原子发射光谱法(ICP-AES) |
|
91 |
ISO 22016-2015 |
Determination of sulfur in refractory products and raw materials by gravimetric, photometric and titrimetric methods 耐火原料和制品—重量滴定法测硫含量 |
|
92 |
ISO 26845:2008 |
Chemical analysis of refractories—General requirement for wet chemical analysis, atomic absorption spectrophotometry and inductively coupled plasma atomic emission spectrophotometry methods 耐火材料化学分析方法—湿法化学分析、原子吸收光谱及感应耦合等离子原子发射光谱法的一般技术条件 |
|
93 |
ISO 23071:2021 |
Refractory products — Determination of reduced species in carbon containing refractories by XRD 耐火材料—XRD法测定含碳耐火材料中的还原性物质 |
|
其他（技术指南和技术勘误表） |
||
|
94 |
ISO 10081—2:2003/Cor 1:2008 |
Classification of dense ,shaped refractory products—Part 2: Basic products containing less than 7% residual carbon—Technical Corrigendum 致密定形耐火制品的分类—第2部分：残炭量小于7%的碱性耐火制品 技术勘误表 |
|
95 |
ISO/TR 21828:2010 |
Guidance on standards available for preparation and testing of monolithic, unshaped refractory products 不定形耐火材料制备与试验技术指南 |
